KOMBIS
Lines for Production of Laminate Tubes, Laminate Pouches and Tube and Pouch Filling Automation

KOMBIS TMM8003



   KOMBIS TMM8003 is an automatic line designated for the production of laminated tubes. The capacity of KOMBIS TMM8003 is 80 tubes/min. The modular construction of this production line allows easy adjustment and maintenance.

    KOMBIS TMM8003 is completed with a number of optional modules, such as:

   • KOMBISEAM - New side seam tube welding technology to improve the tube quality and appearance;

   • Top seal module;

   • Pre-hoppers for automatic loading with caps and shoulders;

   • Arranging automat for packaging of the ready output.

   The control of all operation motions ensures high reliability and safety.




TECHNICAL DATA

PARAMETER VALUE
1. Supplying net:3P+N+PE
Voltage3N ~380 ±10% V
Frequency50±2% Hz
2. Power installed27.7 kVA
3. Power consumedup to 10.6 kVA
4. Periodicity of turning on.100 %
5. Technological air.
Flow-rate
PBL foil1250 l/min
ABL foil550 l/min
Pressure8 bar
Mechanical ingredients< 5µm
6. Cooling water
Flow-rate0,45.10-3 m3/s ( 30 l/min )
Pressure0,2-0,4 MN/ m2 ( 2-4 atm )
Temperature288K (15°С)
7. Measurements sizes
Length6200 mm
Width2440 mm
Height2760 mm
8. Stage of defense from penetration of rigid bodies and water.IP 1XA
9. High-frequency generator - tubes
Power consumed5,5 kW
High frequency exit power4,4 kW
Working frequency270÷370 kHz
Periodicity of switching on100%
10. High frequency generator – shoulders
Energy consumed5,5 kW
High-frequency exit power4,4 kW
Working frequency270÷370 kHz
Periodicity of switching on14%
11. Tubes sizes
DiameterØ16 ÷ Ø50mm [0,63-1,97in]
Length80 ÷ 200mm [3,16-7,87in]
12. Nominal productivity
PBL foil72 tubes per minute
ABL foil80 tubes per minute
13. Operational modeautomatic
14. Level of noise80dB
15. Mass2950 kg
16. Consumables
• Type of the foilABL и PBL
• Tightness of the barrier layer0,02 до 0,04 mm
• General tightness0,175 до0,330 mm
• Width180 mm max
• Configuration of the seallongitudinal


View Picture Gallery






 

   Due to our rich experience in the adjustment of laminate tube making machines we actually realized the operators’ difficulties. The practical experience showed us that one of the most debatable and difficult adjustment for our clients is the adjustment of the shoulder welding of silver laminate tubes. That’s why we made our best and now we offer our new patented system for welding of silver laminate. We guarantee you easy adjustment, excellent quality and guaranteed speed of 80 tubes per minute using this system.



   Analyzing and optimizing the shoulder welding of PBL tubes, we succeeded to develop the first system for one welding position. So, the difficult adjustment of two welding positions is now replaced with patented one position system. Besides the easy adjustment using this system, its other important advantage is the opportunity to manufacture oval PBL tubes.